Optical Fiber Splicing Machine Model: BWN-FX-39

BWN-FX-39 optical fiber fusion splicer is widely used in trunk lines, metropolitan area network engineering construction, security monitoring construction, installation and maintenance engineering and FTTH engineering, covering a wide range, strong usability, and excellent performance.

Optical fiber fusion splicer is suitable for single-mode, multi-mode, chromatic dispersion, non-zero dispersion and other fiber types. It can splice fibers with a cladding diameter of 80-150μm and a coating diameter of 100-1000μm. It has 128 sets of fusion splicing modes. 

Optical Fiber Splicing Machine

When using an Optical Fiber Splicing Machine, it is important to use care while doing the job. A splice can suffer attenuation if there is any residual dirt particles. It is critical to check the splice quality with a reflectometer to ensure a perfect splice. Optical Fiber Splicing Machines must be inspected frequently for dirt and debris.

To start, fibers must be cleaned and stripped of any protective coatings or strength members. Once the fibers are clean, the cleaving process begins. While the process of fusion splicing uses heat, mechanical splicing uses an index matching gel to couple light from the fiber ends. A mechanical splice apparatus may also contain an epoxy or other type of material, depending on the manufacturer.

The Optical Fiber Splicing Machine is a sophisticated machine that fuses two optical fibers together. The fiber ends are stripped and prepared using alcohol. Once this step is complete, the fibers are brought together by a series of electrodes and fused. These machines are usually automatic, but they do require a little set-up by the user. The user must choose the settings recommended by the manufacturer and must clean the bare fiber with 99% isopropyl alcohol to ensure a flawless fusion.

When looking for a machine to perform a fusion splice, it is important to look for one that has multiple cameras for precision alignment. This ensures a seamless splice with minimal signal reflection. Using an optical power meter and video camera, the technician can check the alignment of the fiber before proceeding with the splicing. A good fusion splicing machine will be portable and lightweight.

1.Power Cord: One (USA, UK, Euro, etc.)
2.Language: ( German, English, Spanish, French, Italian, Portuguese, Russian, Vietnamese, Arabic）
3.6S fast splicing, 16S fast heating
4.Average splice loss 0.01dB
5.4.3 inch LCD color display
6.USB interface, convenient for data download and software update
7.Boot Screen: Customization
8.Six-motor alignment，.Core to core Alignment
9.5000 times electrode service life;
10.7800mAh battery, 400 cycles of splicing and heating;
11.Can store 10000 sets of splicing results and 100 sets of images;
12.Application: SM/MM splicing

1.Power Cord: One (USA, UK, Euro, etc.)
2.Language: ( German, English, Spanish, French, Italian, Portuguese, Russian, Vietnamese, Arabic）
3.Boot Screen: Customization