1440 Fibers ODF Outdoor Model: SJ-ODF-05

SJ-ODF-05 1440 fibers ODF outdoor is used for optical distribution applications. It provides the desired space to optical devices and systems such as fiber splicing, patch cords, fiber optic patch panels and other essential passive electronic equipment. This type of frame can be very useful for locations where centralized or distributed data control is required. This device does not require extra power any more than a 0.5mm2 CWDM system and can handle up the 1 meter distance from the source component. If you are looking for quality fiber optic distribution frame and want to buy it from China, please don’t hesitate to contact us.

  • Model: SJ-ODF-05
  • Dimension: 2200X1400X300mm
  • Capacity: 1440 Fibers
Name ODF Outdoor
Model SJ-ODF-05
Dimension 2200X1400X300mm
Capacity 1440 Fibers

ODF Outdoor is a high-capacity, high-density fiber distribution frame, suitable composition, and distribution of fibers in the optical access network to achieve the fiber optic lines connection, distribution, and scheduling, the 19” rack-mounted patch panel, and fiber optic splitter can be loaded inside.

ODF Outdoor Adopts the international standard 19″frame, Fully-closed structure to ensure the fiber protection, and dust-proof. ODF Outdoor is suitable for ribbon and non-ribbon optic fibers.

Main functions:

1. Adopts the international standard 19″frame, Fully-closed structure to ensure the fiber protection, and dust-proof. Electrolysis sheet/Cold-rolled steel frame, electrostatic spraying in the whole surface, nice appearance.
2. Front input and all front operation
3. Flexible installation, wall type, or back type, facilitates paralleling layout and wire feeding among racks and can be installed in large groups.
4. Modular unit box with internal drawer tray integrates distribution and fusing in a tray.
5. Suitable for ribbon and non-ribbon optic fibers.
6. Suitable for inserting the installation of SC, FC.ST (additional flange)adapters,easy to operate and to expand the capacity.
7. The angle between the adaptor and the connecting unit face is 30°. That not only ensures the curvature radius of fiber but also prevents the eyes from being hurt during optical transmission
8. With reliable devices for optical fiber cable stripping, storing, fixing, and grounding.
9. The bending radii in any place are ensured to be more than fixing.
10. Realize the scientific management of the patch cords by using many groups of fiber units.
11. Applies single side frontal access to enable upper or lower lead-in,and clear identify

 

Introduction of Fiber Optical Distribution Frame

Fiber Optical Distribution Frame is an optical distributed networking system that provides a high-speed digital connection to all network interface port devices within specific locations, such as homes and enterprises. The frame distributes local network data to multiple network interface ports through one or more central locations.

The fiber optical distribution frame features a laminated polycarbonate structure that is concealed by an acrylic and glass outer skin. The fiber optic connectors on the front panel of this unit allows you to plug any fiber optic cable in, while the rear panel provides space for a minutiae safety area.

Optical Fiber Distribution Frame

Structure of Fiber Optic Distribution Frame

Bwinners optical fiber distribution frame, installed the internal tail fiber, optical fiber has installed telecom level adapter. When you use the optic fiber distribution frame (ODF) in FTTx system, what you only need to do is welding. With advantages of use convenient, high work efficiency, and stable data comission.

LC, FC, SC, ST connectors are available.

  • Punched pigtail

12 color bunched pigtail, easy to identify and easy to use

  • High precision flange

High precision ceramic bushing, stable connection, loss of less than 0.2dB

  • Ark screw
  • Tie

Structure of Fiber Optic Distribution Frame

Types Of Fiber Distribution Frame

The fiber optic distribution frame is designed to distribute, transmit and route optical signals within the network it runs. These frames are offered in various types such as the modular frames and slide-in frames.

The pull-in frame is available in two configurations: horizontal in which head stages are placed on top of one another, or vertical in which head stages are stacked on top of each other.

Features of Fiber Distribution Frame

Fiber optic distribution frames are among the most essential parts of a business setup. Once you have selected your fiber optic distribution frame, you will be better able to find the right type for your needs and budget. What makes these frames so good is their versatility, reliability and durability.

List are features of ODF:

  • Wear-resisting
  • Waterproof
  • Rust
  • Generous appearance
  • Long service life

Application of Fiber Optic Distribution Frame

Fiber optic distribution frame is used to connect optical fibers from one point to another in a network. The fiber optic distribution frame is the bridge between the end users, who require access to the optical transmission media, and the infrastructure providers, who own and operate physical parts of the communication system and provide their customers with access to those networks. This can be any type of communication systems such as wireless, satellite or corporate networks. Depending on your requirements, you may also be able to provide wideband services and broad area networking opportunities between cities and rural areas as well as within cities.

This fiber optic distribution frame can be fitted with two optical modules to ensure visual performance outdoors and indoor. Fiber optic distribution frame can be used in different locations such as:

  • Shops
  • Lifts
  • Halls
  • Offices

Applicable to all types of network environments

The optical fiber distribution frame is used in dense cabling systems between buildings optical fiber communication systems, LAN cabling optical link interconnection in active equipment.

  1. Desktop computer
  2. Switches
  3. Laptop computer
  4. Digital printer
  5. Remote monitoring

Application of Fiber Optic Distribution Frame

Why Bwinners Fiber Optic Distribution Frame

Bwinners is a leading fiber distribution frame supplier in China, we are responsible for every ODF product, and do the optical fiber breakpoint detection before packing shipments.

After the business is sold, the work doesn’t end for Bwinners. We are always behind our customers and provide them with support so their businesses can continue to grow.

Optical Fiber Distribution Frame ODF

Manufacturing Of Fiber Optic Distribution Frame

Bwinners is an original fiber optic distribution frame supplier in China, we manufacture the ODF product from our own factory. From the raw material to the final fiber optic product, we highly control the quality of every process.

As an original optic distribution frame manufacturer, we not only provide quality assurance, but also we can provide the best price to you, free sample is available.

Manufacturing Of Fiber Optic Distribution Frame

Package of Fiber Distribution Frame

Bwinners always packages our product by standard carton as below. But actually, we also support the customized package service from our customers. If you have demands for customized packages, please contact us early.

Package of Fiber Distribution Frame

Get Our Best Quotation


Professional Supplier with Fiber Optic & FTTx Solution Products
Scroll to Top

Get a Quick Quote!

x