FTTH Fiber Optic Suspension Cable Fish Clamp Model: FACH-BW-01
FACH-BW-01 FTTH fiber optic suspension cable fish clamp, also known as a cable clamp, is a clamp used to hold wires in place. This cable clamp is made of stainless steel for wire and an ABS plastic anchor body. It may be manufactured to withstand all temperatures and weather conditions. If you are looking for stable quality cable fish clamps for FTTx installation, please don’t hesitate to contact us for a quick free quotation.
- Model: FACH-BW-01
- Material: ABS for anchor body; stainless steel for wire
- Dimension: 130mm*40mm*20mm(L*W*D)
- Cable Size: Ø 3.0mm, 2.0×3.1mm, 3.3×2.0mm, 5.0×2.0mm
- MBL: 0.50kN
- Cable Type: Drop Wire for FTTX solution
- Tensile Strength: Be endures up to 900N to 1000N
|Name||FTTH Fiber Optic Suspension Cable Fish Clamp|
|Material||ABS for anchor body; stainless steel for wire|
|Cable size||Ø 3.0mm, 2.0×3.1mm, 3.3×2.0mm, 5.0×2.0mm|
|Cable Type||Drop Wire for FTTX solution|
|Tensile strength||Be endures up to 900N to 1000N|
FACH-BW-01 Anchor Clamp, Suspension Cable Fish Clamp Self-Adjustable for fig-8 cable with stainless steel or aluminum alloy messenger are developed to anchor optical fiber cable with steel messenger during the construction of transmission fiber optic lines.
FACH-BW-01 anchoring clamps are self-adjusted and appropriate for usage with steel messenger. During anchoring of fiber optical cable, FACH-BW-01 guarantees no cable insulation damages or slipping, if indicated load achieved.
Self-adjustable optical fiber drop wire clamp is designed to anchor or support flat and round drop wires are the aerial outdoor solutions.
Also called FTTH-CLAMP, the fish clamp is hand self-adjusted and very easy in installation.
This FACH-BW-01 Suspension Cable Fish Clamp mostly used with optical fiber drop cable. This drop-clamping device is necessary for FTTx solutions.
Fish clamp FTTH can be used in anchoring, turning, suspension optical fiber cable routes.
This type of Suspension Cable Fish Clamp allows easy, installation without additional tools.
Application is similar to all wedge type self-adjusting tension clamps, but should be done according to specification.
All the assemblies passed the tensile tests, operation experience with temperatures ranging from –60 °C up to +60 °C test, temperature cycling test, aging test, corrosion resistance test, etc.
Material: ABS for anchor body; stainless steel for wire
Tool-free, compact and easy installation
Good anti-corrosion performance.
High strength and Wear Resistant
Used for binding the hanged wire of the self-supporting drop cable, and hanging the cable on the supporting device, 2 core drop cable 4mm.