Insertion Module 1x2 SC/APC Fiber Optic Splitter Box, Optical Fiber Splitter Model: BWN-PLC-IM-1X2-SC-APC

Insertion Module 1×2 SC/APC fiber optic splitter box, optical fiber splitter can be used for the splitting of a single point to more than one points. It is almost the same as ordinary PLC splitter at the input and output, and has a higher reliability, lower loss and wider bandwidth of application. The PLC fibre splitter is of high gain and can be used for many applications. It can be used for different applications such as CCTV system and CATV network, etc. PLC Fiber Optic Splitter is a device that splits the signal from one source into two or more outputs. Email us if you have a great deal in PLC optical splitter.

  • Model: BWN-PLC-IM-1X2-SC-APC
  • Splitter Type: ABS Box Type
  • Connector Type: SC/LC/ST APC/UPC
  • Fiber Type: G657A or customized
  • Fiber Diameter: 0.9mm/2.0mm/3.0mm
  • Fiber Length: 1m or Customized
  • Compliance: Telcordia GR-1209-CORE GR-1221-COR
  • Operating wavelength: 1260nm-1650nm
  • Return Loss: 55dB
  • Operating Temperature: -40~85℃
                                                                                                    Table 1-1XN PLC Splitter
Parameters 1×2 1×4 1×8 1×16 1×32 1×64
Operating Wavelength (nm)                                                          1260~1650
Fiber Type                                                             G657A or customer specified
Insertion Loss (dB)(P/S Grade) 3.8/4.0 7.1/7.3 10.2/10.5 13.5/13.7 16.5/16.9 20.5/21.0
Loss Uniformity (dB) 0.4 0.6 0.8 1.2 1.5 2
Return Loss (dB) 55 55 55 55 55 55
Polarization Dependent Loss(dB) 0.2 0.2 0.2 0.25 0.3 0.35
Directivity (dB) 55 55 55 55 55 55
Wavelength Dependent Loss(dB) 0.3 0.3 0.3 0.5 0.5 0.5
Temperature Stability(-40~85 °C)(dB) 0.4 0.4 0.4 0.5 0.5 0.5
Operating Temperature (°C)                                                                -40~85
Storage Temperature (°C)                                                                 -40~85
Device Dimension (mm)   (L×W×H) 40×4×4 40×4×4 40×4×4 50×4×4 50×7×4 60×12×4
Module Dimension (mm)   (L×W×H) 100×80×10 100×80×10 100×80×10 120×80×18 140×115×18 140×115×18
Mini-Module Dimension (mm) 60×7×4 60×7×4 60×7×4 60×12×4 80×20×6 100x40x6
                                                                                           Table2-2XN PLC Splitter
Parameters 2×2 2×4 2×8 2×16 2×32 2×64
Operating Wavelength (nm)                                                    1260~1650
Fiber Type                                                  G657A or customer specified
Insertion Loss (dB) 4 7.6 11 14.4 17.5 21
Loss Uniformity (dB) 0.6 1 1.2 1.5 1.8 2.2
Return Loss (dB) 55 55 55 55 55 55
Polarization Dependent Loss(dB) 0.2 0.2 0.3 0.3 0.4 0.4
Directivity (dB) 55 55 55 55 55 55
Wavelength Dependent Loss(dB) 0.3 0.4 0.5 0.5 0.5 0.5
Temperature Stability(-40~85 °C)(dB) 0.4 0.4 0.4 0.5 0.5 0.5
Operating Temperature (°C)                                                              -40~85
Storage Temperature (°C)                                                              -40~85
Device Dimension (mm)  (L×W×H) 40×4×4 50×4×4 50×4×4 50×7×4 60×7×4 60×12×4
Module Dimension (mm)  (L×W×H) 100×80×10 100×80×10 100×80×10 120×80×18 120×80×18 140×115×18
Mini-Module Dimension (mm) 60×7×4 60×7×4 60×7×4 60×12×4 80×20×6 N/A

Fiber Optic Splitter Box is a type of optical power management device that is fabricated using silica optical waveguide technology.

Fiber Optic Splitter Box features small size, high reliability, wide operating wavelength range, and good channel-to-channel uniformity, and Fiber Optic Splitter Box is widely used in PON networks to realize optical signal power splitting.

Bwinners provides the whole series of 1xN and 2xN splitter products that are tailored for specific applications. All products meet GR-1209-CORE and GR-1221-CORE requirements.

More Pictures

Introduction of PLC Splitter

Fiber optic PLC Splitter is a device that connects two or more optical fibers together. The main function of this product is to split the signal and transmit it through different channels. This can be used to connect multiple devices at the same time. For example, if you want to connect two PCs together, you can use this product to split the signal between them so they can communicate with each other.

Fiber Optic Splitter

Material of PLC splitter

PLC splitter is made of aluminum alloy and high strength plastic, features Impact resistance, heat resistance, low temperature resistance.

Structure of PLC splitter

1 Optical fiber
N Optical fibers
PLC
Input light
Output light

Structure of PLC splitter

Features of PLC Splitter

  1. Low insertion loss
  2. High return loss
  3. Good interchangeability
  4. Good temperature stability.It has an optional function of protecting against overload and short circuit protection, which makes it more reliable when working under high voltage conditions or in an environment with high humidity or dust pollution
  5. The PLC is the best choice for high-quality and low-cost performance.
  6. The PLC is a small, reliable, safe and environmentally friendly electrical circuit.
  7. A wide range of applications can be used with the PLC process.
  8. It has a high degree of automation and power supply.
  9. Various coupling ratio
  10. Environment stable
  11. Single-mode and multimode available
  12. High Channel counts
  13. Wide wavelength range
  14. Customized packaging and configuration

Types of PLC Splitter

  1. Bare Fiber PLC Splitter
  2. Blockless Mini Fiber PLC Splitter
  3. Cassette PLC Splitter
  4. Insertion ABS Box Module
  5. Rack Mounted PLC Splitter

Types of PLC Splitter

Advantages of Fiber Optic PLC Splitter

The main advantage is that you can extend the distance between your devices and transmit data at a faster rate. This is especially useful in large installations where there are many devices and each device has a limited amount of bandwidth.

Another advantage is that you can use the same optical cable for both transmitting and receiving. This means that you do not have to worry about losing some of your transmission capacity as you move around your installation.

For others, you can get the advantages of PLC splitter in the following:

  1. High reliability and fast response
  2. Low cost of ownership
  3. Reduces network traffic, improves network performance
  4. Easy to install, maintain and troubleshoot
  5. It can be used in long-distance data transmission, especially for the transmission of large amount of data from one place to another.
  6. The fiber optic cable splitter can also be used for high-speed internet connection and phone line connection.
  7. Available in different versions for different applications

Why PLC splitter

PLC splitters allow you to use multiple electric outlets at the same time. For example, if you have a workbench with two electrical outlets on the back of it, you can plug in two separate power tools or equipment into each outlet. This makes it easier to move around without having to unplug everything and lug it down one circuit after another. If you have more than two outlets, this can also be used as a way of powering multiple machines at once using one outlet.

Application of PLC Fiber Optic Splitter

The PLC Splitter comes in different sizes and can be used in many different applications like phone charging, electric heating, electric fan etc. They are also known as power-splitters, which is not only helpful for large home appliances but also gives you the flexibility of controlling what you want when you want it.

The PLC fiber optic splitter is used to connect two or more fibers and split them into two or more different fibers. It can also be used to connect and split a single fiber into multiple fibers.

It is used in testing, monitoring, control and automation applications. It can be used as a passive or active splitter.

The PLC fiber optic splitter has many applications such as:

  • Telecommunications: It is used in telephone networks, CATV networks, cable TV systems and satellite systems.
  • Communication networks: It is used in broadcasting services, data communication services (e.g., Internet), voice communication services (e.g., telephone) and video communication services (e.g., videoconferencing).
  • Industrial applications: It is used in industrial automation systems such as programmable logic controllers (PLCs), process control systems (PCSs), supervisory control and data acquisition systems (SCADA), etc.
  • FTTx Construction
  • Fiber Optical communication system
  • Fiber Optical access networks
  • Fiber Sensor
  • Fiber CATV networks
  • Local area networks

Application of PLC Fiber Optic Splitter

Manufacturing of PLC Fiber Optic Splitter

Bwinners is a leading manufacturing company that makes durable quality PLC fiber optic splitter, we produce the PLC spliter in our own factory in China. We are committed to provide durable quality fiber optic splitter for FTTx network system and also provide cost-effective price for our customer to develop and boom their business.

Quality Control of PLC FOS

Bwinners is always providing the high quality fiber optic splitter products for our customers. Long term business is based on sincerely and top quality.

Spectroscopic detection
End face detection
Attenuation detection

Quality Control of PLC FOS

Package of PLC Splitter

Bwinners always packages the PLC splitter by hard cartoon, but we also accept customized package, if you have customized requirements in packages, please let us know.

Normally, mini splitter 1 or 2 pieces in a small blister box, outside by carton box.

Package of PLC Splitter

Get Our Best Quotation


Professional Supplier with Fiber Optic & FTTx Solution Products
Scroll to Top

Get a Quick Quote!

x