12 Port 160 Cores Horizontal Splice Closure FOSC Model: MBN-FOSC-A17

Horizontal splice closure (FOSC) is designed for each segment with cable management, widely used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The splice trays are in-built and the fiber splices are made for fiber optic cable, the fiber makes the splice easier to pull through the cable management system and keeps it neat and clean. If you are looking for a horizontal splice closure for your network connection & storage, please don’t hesitate to contact us for a quick quotation.

  • Model: MBN-FOSC-A17
  • Dimension: 395X200X120mm
  • Max Capacity: 32 Cores X 5 Splice tray, 160 Cores
  • Cable Hole: 4 In 8 Out, 12 ports
  • Cable Diameter: For Φ7~Φ15mm
  • Sealing Structure: Mechanical sealing with rubber ring and clip lock
  • Material: PC, ABS, PP
  • Installation: Aerial, Duct, and Direct buried
  • IP Grade: 67
Name 12 Port 160 Cores Horizontal Splice Closure FOSC
Model MBN-FOSC-A17
Size 395X200X120mm
Cable Hole 4 In 4 Out, 8 Ports
Sealing Structure Mechanical sealing with rubber ring and clip lock.
Material PC, ABS, PP
Max Capacity 32 Cores X 5 Splice tray,  160 Cores
Cable Diameter For Φ7~Φ15mm
Installation Wall-mounted, Pole-mounted, Aerial
Protection Grade IP67
Packing Info 10pcs/Carton, 48X38X85CM, G.W.: 18kgs

Horizontal Splice Closure (FOSC) widely used as a termination point for the feeder cable to connect with the drop cable in FTTx communication network system. The fiber splicing, splitting, and distribution can be done in this box, and meanwhile, it provides solid protection and management for the FTTx network building.

 

Features

1. Total enclosed structure.
2. Material: PP, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP67.
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution, etc all in one.
4. Cable, pigtails, and patch cords run through their paths without disturbing each other, micro type PLC splitter installation, and easy maintenance.
5. The distribution panel can be flipped up, and feeder cable can be placed by expression port, easy for maintenance and installation.
6. The box can be installed by way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use.

 

Introduction of fiber optic distribution box

The fiber distribution box comes with splice trays and cable management for splitting incoming and outgoing cables. Made to fit a wide range of installer needs, the enclosure features exposed front and rear panels in order to allow for easy access to all areas inside.

FTTA NAP Closure Fiber Distribution BoxIt can splice multiple cable transmissions in one box with just minimum number of splice trays. And it also comes with combining splice trays for keeping the cables split into outgoing and incoming flows.

Types

There are two types of fiber optic distribution box, one is wall-mounted fiber optic distribution box which is used on wall and the other is Pole mounted fiber optic distribution box.

Material

The optical fiber cable distribution box can be made of plastic, metal or SMC All of these three material fiber optical distribution box can be found from Bwinners. You can choose the suitable one according to your requirement. Bwinners will show the material as below.

Distribution Fiber Box

Plastic

Normally the plastic fiber distribution box materials used are PP, ABS, ABS+PC. The differences between those materials are in the density to obtain more impact resistance, temperature and flame resistance.

ABS is also cheaper than PC and is the most used for regular environments.

ABS+PC Strong material to endure harsh environmental conditions.

PC+ABS material used ensures the body strong and light.

Fiber Distribution Box Material ABS

Metal

This metal fiber optic distribution box comes with a durable metal construction to provide additional strength and reliability.

The metal material that is used to make the box is strong for outdoor uses, and waterproof for enhanced durability.

Wall Mount Fiber Enclosure

SMC

SMC (Glass fiber reinforced plastic) Fiber Distribution Box is lighter than the metal material box but stronger than the plastic material box, and can be molded to be different beautiful shapes. For Indoor/Outdoor application.FTTH Distribution Box

If you don’t sure what material is suitable for your network project, just feel free to contact us, we’d like to provide you the best solution.

Features of Distribution Box

  • High mechanical strength
  • Corrosion resistance
  • Good sealing performance
  • This enclosure is designed to house up to 24 splices or 144 fibers.
  • The distribution box can be installed on the wall or cabinet, and provides a high-density fiber optic connection.
  • Can accommodate a variety of cable connections, including terminals with sanded or non-stripped fibers.
  • Indoor fiber optic distribution box can be divided into8 cores, 12cores, 16cores, 24 cores, 48 cores specifications according to the project need.
  • Outdoor fiber optic distribution boxes are equipped with cable inlets and outlet ports, which can easily connect with the inlet and outlet cables.
  • FTTX fiber optic distribution boxes are designed with a high density of fiber optic connectors and can be used to connect multiple distribution hubs in one location, which is convenient in large-scale projects.
  • Fiber optic distribution box is widely used as fiber patching panel, fiber splicing box and fiber termination box, etc.
  • The structure of FTTX fiber optic distribution box is strong and light weight, flexible to fit different pole sizes and easy installation on site.
  • FTTX fiber optic distribution boxes come with various colors to meet customer requirements

 

Why Distribution Box

  • Simplify the cable management:

With fiber distribution boxes, you can expect cables to be organized without having to deal with difficult cable management issues. Simplified installation and maintenance with movable structure.

  • Pre-installed splice tray:

You don’t have to worry about having problems with the internal connections because it comes with a pre-installed splice tray.

  • Available to add extra protection:

The fiber optic box is designed to accommodate multiple fusion splice trays and splice protection sleeves. You have the option of adding on other accessories and security features so that you are able to add extra protection whenever necessary.

  • Easy installation:

The fiber optic box is designed for easy installation which means that you can finish setting up the equipment and have everything installed in a short period of time.

  • Multi-functions in one box:

The fiber optic distribution box is used in wiring, splicing, distribution, and terminal connection of optical fiber cable. Inside with tray for splicing and easily accessible main cables. Cable connection and splicing can be carried out in the same box.

Structure

The structure of the optical fiber distribution box is mainly composed of the box body, the internal sheet metal workpiece, the optical fiber movable connector, and the spare accessories.

The structure of the fiber optic distribution box is composed of several functional units. The functional units are :

  1. Making the SC or LC fiber adapter,
  2. Connecting with optical patch cord or fiber pigtail,
  3. Connecting with mechanical patch cord,
  4. Connecting with optical drop cable or communication line

structure of the optical fiber distribution box

Application

Provide fixing space for optical fiber or other devices, suitable for fiber to the home (FTTH) applications;

Network interconnection

Resource sharing can provide users with various services such as voice, data, radio and television

Fiber To The Cabinet (FTTC)

Fiber To The Building (FTTB)

CATV networks

Optical fiber communication

FTTX

Fiber optic network convergence

Optical fiber access network

Telecommunication networks

Data communications networks

Local area networks

Application of fiber optic distribution box

Manufacturing of fiber optic distribution box

Bwinners is a professional fiber optic distribution box manufacturing company that makes durable fiber termination box in China factory. Quality assurance, best after service is available.

Manufacturing of fiber optic distribution box

Package of fiber optic distribution box

Bwinners always packages the termination box by hard carton, if you have customized package requirement, we also support your demands based on MOQ. Contact us, send us your requirements in email, we’d like to meet your satisfaction.

Package of fiber optic distribution box

 

Get Our Best Quotation


Professional Supplier with Fiber Optic & FTTx Solution Products
Scroll to Top

Get a Quick Quote!

x